Function Features:
1) Has 270.scanning range;
2) Configure the LS01 from a laptop or computer;
3) Different areas can be set (warning area, danger area);
4) Communication interface: USB, 485 (special 485 cable accessories required,Please refer to the appendix);
5) With a variety of input/output modules, easy input/output type switching;
6) With 2 OSSD outputs and 1 AUX output, OSSD output and AUX canindicate different zone types, etc;
7) Output overload protecte;
8) With product operating status OLED display and LED display;
9) Product features can be configured via keystrokes;
10) High efficiency, good concealment, strong anti-interference ability,small size, light weight and reliability.
Product images
| Product parameter |
| Project |
Parameter |
| OFF indicates the maximum voltage |
2.0 V |
| Maximum leakage current |
1 mA |
| Maximum capacitive load |
1μF |
| Maximum cable length |
20 m |
| Shell protection |
IP65 |
| Operating ambient temperature |
-10 ºC +50 °C( Freeze-free) |
| Storage ambient temperature |
-25 ºC +60 °C( Freeze-free) |
| Operating relative humidity |
35 ~85 % Rh(non-condensing) |
| Storage relative humidity |
35 ~95 % RH |
| Bient light selfburning lamp |
1500 lx or below |
| Vibration |
10 ~ 55 Hz, 0.7mm compound amplitude, 20 frequency sweeps in X, Y and Z directions |
| Impact |
100 m/s (about 10 G) 16 ms pulses, 1000 in each axis in the X, Y and Z directions |
| Material |
Main device (internal support pressed wrong aluminum, stainless steel shell) |
| Mask PC |
| Project |
Parameter |
| Minimum measured object |
Diameter 30, 40, 50, 70, 150 mm (depending on setting) |
| Detectable Angle |
270(° -45°~ 225°) |
| Response time (ON to OFF) |
Default: 120ms(40 ms to 400 ms) |
| Recovery time (OFF to ON) |
Default: 120ms(40 ms to 400 ms) |
| Standard scan period |
40ms |
| Maximum monitoring area |
50m(standard white reflective panel) |
| Maximum detection distance(According to test specimen size) |
4m (40mm specimen) 8m(80mm specimen) 12m(120mm specimen) |
| Type of light source |
905nm infrared laser |
| Laser classification |
1 type IEC / EN 60825-1: 2014 |
| Rated supply voltage |
24 V DC ±10 % |
| Power consumption |
Max. 10W (excluding load) |
| Output mode |
Two-way PNP or NPN (can be set according to the software) |
| Maximum load curren |
t 100 mA |
| Residual voltage (ON period) |
Max 2.5V |
Factory show
Products Certification
Company Cooperative units
Our Exhibition
Q: Can i get some samples ?/Do you offer samples available?
A: Yes, Paid samples are available, sample cost can be deducted at formal order.
Q: How is the warranty?
A: 18 months warranty. We will take care of all quality issues during this period but the man-made damage, improper operation and force majeure will be excepted.
Q:How about the quality of the products?
A:Products have the certification of CE,CCC,CQC,EU,TUV,UL, and Safety Level achieved Ple,SIL,Type 4,Cat.4 etc.
Q: What is the quality guarantee?
A: ISO 9001-2015 ,ISO 14001 -2015 certified manufacturer, strict quality control system. Besides calibration, each set product we also do aging test before shipment.
Q: Do you have any products in stock?
A: Two factories in stock, fast delivery.
Q: Can I be your distributor?
A: Yes, we are looking for distributors in oversea market and offer full support.
Q: Do you accepte ODM and OEM ?
A: Please contact us for details.
){kind=link}
){kind=link}