PLe Cat.4 Infrared Scanning Vehical Separator Light Curtains

• Customization: Available
• Output Signal Type: Transistor
• Material: Plastic+Aluminium
• Certification: CE
• Customized: Customized
• Safety Standard: ISO13849-1 /ICE61496-1/2(Type 4)
• Safety Level: PLe Cat.4
• Emitter/Receiver Range: 0.1-4m
• Detection Height: 120-2400mm
• Detection Distance: 0.1-20M/2-50M/5-100M/10-200M
• Contect Type: Air Plug
• Output Mode: 2 NPN/PNP
• Anti-interference: >10000Lux
• Transport Package: Paper Box
• Trademark: SLC
• Origin: China

Product Description

Functional Features:

3 scanning methods:
·Straight scan
·Single-edge scan
·Double-edge scan (1, 2, 4, 8, 16, or 32 steps)

20 measurement ("scan analysis") modes

2 analog outputs, 2 discrete outputs, plus Modbus 485-RTU serial output.
Excellent 5 mm minimum object detection or 2.5 mm edge resolution, depending on scanning method
Outstanding 4 meter range with 5 mm beam spacing, 3-digit display and 6 LEDs for sensing information and diagnostics,Software PC interface available for advanced configuration setup.

Remote teach wire option for alignment, gain settings, inverted display.
 

Technical Parameters
Electric Parameters
Supply Voltage(Limit Values)			Emitter: 12 to 30V dc Receiver Analog Current Models: 12 to 30V dc Receiver Analog Voltage Models: 15 to 30V dc
Supply Power Requirements			Emitter/Receiver Pair (Exclusive of Discrete Load): Less than 9 watts Power-up delay: 2 seconds
Scan Time			Scan times depend on scan mode and sensor length. See Table3.2 for all combinations.
Two Discrete Outputs			2-channel independent PNP/NPN transistor output Output drive maximum load: 150mA Pressure drop on output pipe: 2V@150mA
Two Analog Outputs			Voltage Sourcing: 0 to 10V (maximum current load of 5 mA) Current Sourcing: 4 to 20 mA (maximum resistance load = (Vsupply−3.5) / 0.020)
Scan Method			Straight Scan  Single-Edge Scan  Double-Edge Scan
Measure Mode			FBB,LBB,TBB,MBB,FBM,LBM,TBM,OD,ID,CBB,CBM,CFBB,CLBB,O1FBB,O1LBB O2FBB,O2LBB,O3FBB,O3LBB,TRN
Serial Communication Interface			EIA-485 Modbus RTU (up to 15 nodes per communication ring)RTU binary formatBaud Rate: 9600, 19.2K or 38.4K ,8 Data Bits, 1 Stop Bit and No Parity
Environmental Rating			IEC Ip65
Operation Temperature			-10~55ºC
Storage Temperature			-20~70ºC
Relative Humidity			15%~95%
Shocking			10g/20ms
Optical Parameters
Sensor Positional Resolution			Straight Scan: 5 mm,   Double-Edge Scan: 2.5 mm,   Single-Edge Scan: 2.5 mm
Detect Height			120~2400mm
Emitter/Receiver Range			0.1~4m
Optical Channel Number			24~480
Optical Channel Spacing			5mm
Field of View			±3°
wavelength			940nm
Synchrony			>10,000Lux

Product application cases
Factory Show


Products Certification


Q: Can i get some samples ?/Do you offer samples available?
A: Yes, we can provide sample, but the cost of the sample is paid by the customer, if you feel satisfied and have the next mass production order, we can deduct the cost of the sample.

Q: How is the warranty?
A:our warranty time is 18 months. If the product has quality problem within 18 months, please return it to us, we will repair it; if we can't repair it successfully, we will give you a new one; but the man-made damage, improper operation and force majeure will be excepted. And you will pay the shipping cost of returning to us, we will pay the shipping cost to you.

Q:How about the quality of the products?
A:we have the certification of CE,CCC,CQC,EU,TUV,UL, and products Safety Level archived Ple,SIL,Type 4,Cat.4 etc.

Q: What is the quality guarantee?
A: We are an ISO 9001-2015 ,ISO 14001 -2015 certified manufacturer, we have strict quality control system. Besides calibration, each set product we also do aging test before shipment, so the quality is guaranteed.

Q: Do you have any products in stock?
A: Depend on the order quantity.

Q: Can I be your distributor?
A: Yes, we are looking for distributors in oversea market.