Type 4 PLe safety level light curtains,fit in auto Production line

Product Description

The LC general light curtain is a new type of counter-reflective product developed using advanced technology from abroad.The LC light curtains can completely replace imported area sensors, such as: NA series, SAS series,PJV series, etc. It has been widely used in production lines,injection molding machines, hydraulic presses and other equipment with low detection risk.

Function Features:

1) Comply with EN/IEC 61496-1/-2, Type4 safety level
2) Comply with ISO13849-1 PLe, Cat.4 safety level requirements
3) An optoelectronic safeguarding device
4) Optical synchronization, easy installation
5) High speed infrared scan, there are three resolutions model:
      14mm resolution models with defined areas from 110 mm to 1217mm
      25mm resolution models with defined areas from 180 mm to 3140mm
      30mm resolution models with defined areas from 125 mm to 2025mm
      45mm resolution models with defined areas from 200 mm to 3400mm
6) 25*28mm cross-sectional area, the smallest outline size, widely used in small machines with restricted structures
7) Highly immune to EMI, RFI, ambient light, weld flash, and strobe light E
 

General Specification
Item	Parameter
Safety standards	EN/IEC 61496-1 (Type4 ESPE); EN/IEC 61496-2 (Type4 AOPD); ISO13849-1    ( PLe,Cat.4);
Power Protection	Reverse/Short Protection
Output Protection	Output Short to Power Source or Ground Protection; Over voltage protection; Over current Protection;
Beam spacing	10mm/20mm/25mm/40mm
Synchronization	Light Synchronization
Start-up Time	5s
Response Time	See Production Selection Guide
EAA	±2.5º
Operation Range	0.1-3m
Enclosure	IP65
Ambient Light Immunity	10,000lx
Operating Temperature	0-55ºC
Operating Humidity	95%
Storage Condition	-20-85ºC,Max Humidity 95%
Vibration	10-55HZ 0.35mm (single amplitude)   X,Y,Z, each direction 20 Cycles
Shock	10g 16ms X,Y,Z each direction 1000 times
Emitter Specification
Item	Parameter
Power Supply	24V±15%
Supply Current	150mA Max
Testing Signal	Low Signal:   0-3V High Signal:  10-30V
Wavelength of LED	940nm at peak emission
Receiver Specifications
Item	Parameter
Power Supply	24V±15%
Supply Current	150mA max., Exclusive of OSSD1 and OSSD2 loads
OSSD1/OSSD2	2 NPN or 2 PNP
OSSD1/OSSD2 Load Current	300mA Max. each channel
OSSD1/OSSD2 Output Residual Voltage	<3V
OSSD1/OSSD2 Leakage current	0.1mA maximum
OSSD1/OSSD2 Max. Load capacitance	1uF
Cable Resistance	2.5Ω maximum

 



Product application cases
Products Certification


 Our Exhibition
Q: Can i get some samples ?/Do you offer samples available?
A: Yes, we can provide sample, but the cost of the sample is paid by the customer, if you feel satisfied and have the next mass production order, we can deduct the cost of the sample.

Q: How is the warranty?
A:our warranty time is 18 months. If the product has quality problem within 18 months, please return it to us, we will repair it; if we can't repair it successfully, we will give you a new one; but the man-made damage, improper operation and force majeure will be excepted. And you will pay the shipping cost of returning to us, we will pay the shipping cost to you.

Q:How about the quality of the products?
A:we have the certification of CE,CCC,CQC,EU,TUV,UL, and products Safety Level archived Ple,SIL,Type 4,Cat.4 etc.

Q: What is the quality guarantee?
A: We are an ISO 9001-2015 ,ISO 14001 -2015 certified manufacturer, we have strict quality control system. Besides calibration, each set product we also do aging test before shipment, so the quality is guaranteed.

Q: Do you have any products in stock?
A: Depend on the order quantity.

Q: Can I be your distributor?
A: Yes, we are looking for distributors in oversea market.