| Customization: | Available |
|---|---|
| Type: | Measurement Light Curtains |
| Output Signal Type: | Transistor |
|
Still deciding? Get samples of US$ 860/Set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Content | Description | |
| Min Detected Object (length*width * height) |
Typical value:100mm*50mm*5mm; Length limits:It is determined according to the width of the conveyor belt gap to prevent the passing of objects from shaking; Width limits:Since the position of the object on the conveyor belt is rotated by different lengths, there is no strict distinction between width and length, so the width limit is the same as the degree limit in principle; Height limits:The object should be able to block at least one beam of light (grating lens 5mm) from the height grating, if the first lens of the grating is still far from the conveyor belt,the min-measurement height = 5mm + the height of the first lens of the grating from the plane of the conveyor belt. |
|
| Max Detected Object (length*width * height) |
Typical value:3000*1000mm*1000mm The width and height depend mainly on the grating degree used. If there is a larger size, it can be customized |
|
| Measurement Accuracy (length*width * height) |
Length*Width:10mm*10mm Height :2.5mm | |
| Minimum spacing between objects | 200mm | |
| Conveyor Systems | Flat conveyor surface The two conveyor lines require simultaneous synchronization of the same speed; a single object (minimum distance between objects); |
|
){kind=link}