SLC-LP series safety light curtain receiver 8 core 8 pin cable

Product Description

SLC-LP safety light curtain(7.5/15/30mm)
Standard	ISO13849-1(PLe,Cat.4) IEC61496-1,EN61496-1, GB/T19436-1(Type4 ESPE); IEC61496-2, EN61496-2, GB/T19436-2(Type4 AOPD);	Optical Parameters
		Detection height		90~2370mm
		Detect distance		0.1~6m,(2m,8m,10m,15m,20m,30m, 40m customizable)
Authenticate	CE/GB,EN61496-1/2(Type4),ISO13849-1 ( PLe,Cat.4)
Physical Character		Optical axis		4~80
Cross-sectional Dimension	35mm×40mm	Resolution		12.5/20/35mm
Installation	L-shaped two-end installation; back slot installation	Wavelength		940nm
Weight	Change With Altitude	Synchronizati		Light synchronization, close to the first beam of the nixie
Connection Type	Aviation Plug-in; Direction Outlet
Electrical Parameters
Power Supply	24VDC±10%		Frequency selection function		Adjacent gratings can be set to different frequencies to prevent interference from the same frequency light
Power Consumption	5W
Response time	See selection table		Output feedback		EDM external relay status feedback
Safety Output	2 NPN or 2 PNP redundant outputs, short circuit protection, overload protection, pulse testing		Enclosure ^nprotection class		IP65(Customizable IP67,IP69)
Manual Reset or Interlock	When the light curtain is working but there is an exception, the light curtai immediately enters the closed state until the exception is lifted. Provides a lock-reset function at the receiving end, and applies to fully automatic lines or large area position protection to ensure safe start-up
			Operating temperature		-10~55ºC
			Storage temperature		-20~70ºC
Bypass function (by pass)	This function is combined with two external and incoming signals to pass the difference between people and materials. The material on the line can be smoothly passed through the light curtain, while the person passin protected.		Relative humidity		15%~95%
			Impact resistance		10g/20ms
			Response time		See selection table
PFHd	-8 <4.3x10		MTTFd		263 year