| Customization: | Available |
|---|
|
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| System parameters | ||
| Project | Parameter | |
| Safety standards | IEC61496-1,EN61496-1, GB/T19436-1(Type4 ESPE); IEC61496-2, EN61496-2, GB/T19436-2(Type4 AOPD); ISO13849-1 ( PLe,Cat.4); IEC62061, EN62061(SIL3) IEC61508, EN61508 (SIL3) |
|
| PHFd | -8 3.17×10 |
|
| MTTFd | 312 years | |
| Power protection | Power supply reverse/short circuit ground protection | |
| Input/output protection | All inputs/outputs are shorted to power or ground protection | |
| Optical axis spacing | 7.5mm/15mm/30mm | |
| Resolution | 14mm/25mm/40mm | |
| Synchronization mode | Optical/wire synchronization (optional depending on wiring method) | |
| System startup time | 5s | |
| Response time | Reference selection table | |
| Aperture degree (EAA) | ±2.5º | |
| Protection length | 0.1~6m | |
| Protection degree | IP65 | |
| Anti-interference | >10,000lxambient illumination | |
| Temperature | Working temperature -10~55°C (no freezing) | |
| Humidity | Maximum relative humidity 95% (no condensation) | |
| Storage | Storage temperature -20-85°C, maximum relative humidity 95% | |
| Vibration resistance | 10-55Hz amplitude 0.7mm | |
| Impact resistance | 10g16ms 1000 times in the x.y ,z direction | |
| Emission parameters | ||
| Project | Parameter | |
| Supply voltage | 24V±15% | |
| Supply current | Max 150mA | |
| Emit LED waves | Infrared LED (peak wave 940nm) | |
| Receive parameters | ||
| Project | Parameter | |
| Supply voltage | 24V±15% | |
| Supply current | Max 150mA (excluding OSSD1 and OSSD2 load currents) | |
| OSSD1 or OSSD2 Output type | 2 NPN or 2 PNP | |
| OSSD1 or OSSD2 Max load current | 500mA | |
| OSSD1 or OSSD2 Output residual voltage | Less than 3V | |
| OSSD1 or OSSD2 Leakage current | Max 0.1mA | |
| OSSD1 or OSSD2 Max capacitive load | 0.1μF | |
| Load connection resistance | Max 2.5Ω | |
| EDM input | Low level 0-3V, high level 10-30V | |
| Reset input | Low level 0-3V, high level 10-30V | |
){kind=link}